All Blogs

What to Do When the Laser Does Not Ray
What to Do When the Laser Does Not Ray
1. When the laser does not ray, first check whether the machine is properly powered on: check if the power switch is turned on, if the on/off key switch is... Подробнее...
Camera Calibration Tutorial for LightBurn
Camera Calibration Tutorial for LightBurn
Here is the camera calibration tutorial for LightBurn. Подробнее...
Camera Calibration Tutorial for AtomStack Studio App
Camera Calibration Tutorial for AtomStack Studio App
Here is the camera calibration tutorial for AtomStack Studio app. Подробнее...
Unboxing Video for AtomStack Hurricane
Unboxing Video for AtomStack Hurricane
Here is the unboxing video for the AtomStack Hurricane 55W CO2 Laser Cutter. Подробнее...
How to Deal with Poor Cutting Results or Incomplete Cuts?
How to Deal with Poor Cutting Results or Incomplete Cuts?
1. Check if the laser was correctly focused. The height from the object to the nozzle should be 8mm 2. Check if the parameter settings are correct: Refer to our... Подробнее...
How to Deal with Bad Positioning?
How to Deal with Bad Positioning?
1. Check if the score value is too high during calibration: The score value should be within 0.6 during calibration; otherwise, it will affect the calibration accuracy. If the score... Подробнее...
AtomStack Studio Unable to Find Hurricane via USB
AtomStack Studio Unable to Find Hurricane via USB
If, after powering on the Hurricane device and connecting it to the computer with a USB data cable, AtomStack Studio is unable to detect the device, follow the steps below.... Подробнее...
AtomStack Hurricane Laser Equipment Safety Guide
AtomStack Hurricane Laser Equipment Safety Guide
To ensure your safety and the proper operation of the equipment, please strictly follow these safety guidelines. 1. Preparation Before Operation Inspect the Equipment: Before each use, check the equipment... Подробнее...
From Aeromodelling to Laser Mastery: Andrea's Creative Evolution with AtomStack
From Aeromodelling to Laser Mastery: Andrea's Creative Evolution with AtomStack
Editor's Note： Starting as an aeromodelling enthusiast, Andrea gradually got in touch with lasers and finally became an expert in laser engraving. His journey highlights the evolution from early laser... Подробнее...
Your Personal Desktop Factory: AtomStack Hurricane CO2 Laser Cutter
Your Personal Desktop Factory: AtomStack Hurricane CO2 Laser Cutter
As a powerful 55W CO2 laser cutter, AtomStack Hurricane is engineered to meet the diverse crafting needs of creators across all skill levels, from workshop artisans and small business owners... Подробнее...
Is There a Suitable Laser Engraver for Metal?
Is There a Suitable Laser Engraver for Metal?
Laser technology is a very effective method for metal engraving. It is capable of providing high accuracy compared to other methods. Its fine laser can also create various detailed designs... Подробнее...
AtomStack Partners with Thingiverse for a Creative Challenge!
AtomStack Partners with Thingiverse for a Creative Challenge!
We're thrilled to announce that AtomStack has partnered with Thingiverse, the world's largest 3D printing community, to launch a creative challenge that blends the best of 3D printing and laser... Подробнее...