Graveur laser à cadre monobloc A24 ultra optique 24 W.
Frequently Bought Together
Piédestal haut AtomStack H2 dédié à la série Unibody
Lentille de remplacement de lentille de fenêtre Atomstack pour graveur Laser A6/12/24/48 Pro/Ultra A10/A20/A40 PRO V2/Max A70 PRO/ A70 MAX
Lightburn Software - Clé de licence Gcode, pour la plupart des machines de gravure laser à diode du marché
Rouleau rotatif de graveur laser AtomStack R2 V2
AtomStack F3 panneau de découpe matricielle graveur Laser plaque de protection Table de travail avec fixations
Liste de accessoires:
Câble ancre x 8 pièces
Câble serrer x 8 pièces
WIFl antenne
Fixé se concentrer lentille
Éclair conduire
Pouvoir adaptateur 24 V, 5 A
H3 hexagone En forme de L clé
M4 pouce vis x 2 pièces
Curseur
Changer clé
Un à deux TAPER C câble
Pouvoir câble
Axe X lien câble
Silicone tuyau (air) tuyau)
Lunettes
100*30 sans peluches tissu
(M4*6)x 4 pièces
Utilisateur manuel
Boîtier B3 x 1
The unrivaled choice trusted by diode laser experts.
Meet all your
needs.
Unibody frame Installation-free
Ready to use out of the box, A24 Pro is eager to serve you. Skip the hassle of tightening screws or dealing with confusing setups.
Stable 24W Optical Power
Harnessing the power of innovative laser technology, the A24 Pro utilizes a 24W high-power laser beam, elevating cutting capacity and efficiency to new heights.
Long beam waist laser - ideal for precision deep cutting.
Boost your productivity.
With the optimized algorithm, AtomStack A24 Pro's working speed can reach as high as 36000mm/min, keeping you completely at ease when taking care of orders.
Faster Working Speed 36000mm/min.
Less time for higher productivity.
High precision and reliable operation
Higher motion accuracy.
100% Reprinting Your Laser Engraving Ideas.
Your safety is our utmost concern.
Comprehensive security protection
Stay safe and secure with the A24 Pro, which comes with move/tip instant stop and detect flames instant stop functions. Requires the L2 automatic Z-axis adjuster.
Detection for extensive protection.
Eye Safety Guaranteed
Included with your purchase are complimentary laser safety goggles, offering dual protection to mitigate the risk of eye injury.
Move / Tip Instant Stop
To ensure safety and prevent laser burns or damage to the tabletop, the engraving machine is programmed to instantly stop working if moved or tilted during operation.
Detect Flames Instant Stop
The A24 Pro laser engraving machine includes a built-in flame detection system. If a flame is detected, engraving stops immediately, and an alarm alerts for attention. Requires the L2 automatic Z-axis adjuster.
Every detail matters.
Focus adjustment with ease. Adjust focus effortlessly in 3 steps within 5 seconds: Unscrew the focus nut, slide the laser slider, and tighten the focus nut.
Large engraving area. A spacious working area of 365*305mm (14.4*12 inches), larger than A3-sized paper, allows you to engrave more patterns at once. Easy to use and more efficient. Expandable to 800*365mm with R5 Automatic Conveyor Feeder
Work on higher objects. Use additional risers (purchased H1 High Pedestal or H2 Fully Enclosed High Pedestal) to increase the height of AtomStack A24 Pro to facilitate the engraving of higher objects (height increase up to 178mm).
Just connect. Transfer data seamlessly using Wi-Fi, USB cable, or a large-capacity TF card (for offline use), allowing you to utilize the A24 Pro anytime, anywhere.
A one-stop solution for all your machine upgrades.
Our results speak for themselves.
Product Specifications
Product Information
A24 Pro 24W
Machine Power: 120W
Laser Module Output Power: 20~24W
Input: 100-240V AC, 50/60HZ
Output: 24V 5A
Laser Wavelength: 455 ± 5 nm
Laser Spot: 0.06*0.08mm
Routing Speed: 600 mm/s
Max. Workpiece Height: 55 mm (2.17 inches)
Max. Workpiece Height with H1 High Pedestal: 55 mm + X*60 mm (highest 177 mm）
Max. Workpiece Height with H2 Fully Enclosed High Pedestal: 55 mm + 123 mm (highest 178 mm）
Working Area
365 * 305 mm (14.4*12 inches)
Expandable to 800*365mm 800 x 365mm (31.5" x 14.37") with R5 Automatic Conveyor Feeder
Connection and Softwares
Operating Systems: Windows / Linux / macOS
Control Software: AtomStack Studio, LaserGRBL, LightBurn
Supported File Type: JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF.
Connection / Transmission: Wi-Fi, USB, APP
Certification: CE FCC RoHS FDA PSE