All Blogs

Here is the Unboxing and Installation of the AtomStack H3 Riser Base for the AtomStack Hurricane.

Here is the Path Adjustment Tutorial for the AtomStack Hurricane.

You need to add purified water, as non-purified water will affect the lifespan of the CO2 glass tube. Purified water has superior thermal conductivity and fewer impurities, which can improve heat a...

1. Check the appearance of the machine. If it is severely damaged, do not use it. Please contact ATOMSTACK for assistance.2. Check the laser tube. Unscrew the screws of the rear cover, remove the r...

1. When the laser does not ray, first check whether the machine is properly powered on: check if the power switch is turned on, if the on/off key switch is in the ON position, and if the emergency ...

Here is the camera calibration tutorial for LightBurn.

Here is the camera calibration tutorial for AtomStack Studio app.

Here is the unboxing video for the AtomStack Hurricane 55W CO2 Laser Cutter.

1. Check if the laser was correctly focused. The height from the object to the nozzle should be 8mm 2. Check if the parameter settings are correct: Refer to our recommended material settings table...